"UNO+" collection (produced by APG holding) is created for the consumer who values the strictness and unity of style. A wide range of products gives you the opportunity of efficient and space-saving supplying of any kind of office with furniture. You can make good use of all working space even in small offices using worktables together with conference attached tables and high cases with low shelves. The collection is made of high-quality laminated chipboard with "shagreen leather" stamping on its surface.

"UNO+" collection provides a wide variety of tables such as rectangular and ergonomic, supporting tables, joint tables (writing table + computer table). Tabletops of different kinds and sizes are made of high-quality laminated chipboard 28 mm thick, and are panelled with a shockproof PVC edging which is 2,0 mm thick. Side surface, shelves, drawers and fronts are made of high-quality laminated chipboard 18 mm thick. Tables are 75 cm high.

Rectangular tables 74 cm wide are represented by 2 models: ST10 - length 150 cm and ST11 - length 120 cm.

Supporting tables are designed for installation of the office technical equipment and are represented by 3 models: ST09 (length 74 cm, width 74 cm); ST12 (length 76 cm, width 55 cm) that is supplied with a shelf for a PC case and a pullout shelf for keyboard; ST13 (length 120 cm, width 48 cm, height 65 cm).

ST20 ergonomic table (length 140 cm, width 90 cm) is represented by two variants: left-sided ST20(L) and right-sided ST20(R).

Joint tables are equipped with pedestals with pullout drawers on metal glide structures, a pullout shelf for keyboard and a shelf for a PC case too.

• ST82, ST82r length 120 cm, width 55 cm;
• ST83 length 140 cm, width 74 cm;
• ST84 length 150 cm, width 74 cm.

Angle elements and conference attached tables are used for expansion of working space on the table surface, taking the individual consumer's demands into consideration. They allow maximum adapting of working place for the customer's needs and they still preserve ergonomics and design of the collection.

ST14 angle element (length 74 cm, width 74 cm, height 75 cm) is installed on chipboard supports and is shaped as a quarter-circle segment.

ST15 angle element (length 74 cm, width 74 cm, height 75 cm) is installed on chipboard supports and is shaped as a truncated quarter-circle segment.

ST18 conference attached table (ø 120 cm, height 75 cm) is fixed to the tabletop and supported by a metal height-adjustable leg.

Tabletops are made of high-quality laminated chipboard 28 mm thick, and are panelled with a shockproof PVC edging 2,0 mm thick. Side surfaces are made of high-quality laminated chipboard 18 mm thick.

Angle elements can form negotiation tables.

Using a conference attached table you can furnish an economic class director's office.

The present collection offers a Р1 PC case support (width 25 cm, depth 50 cm and height 15 cm) that is specially developed for the tables that shelf for a PC case is not provided for.

The following added pieces for working places' furnishing are provided: N10 (length 150 cm, depth 36 cm and height 33 cm) for tables with length of 150 cm and N20 (length 120 cm, depth 36 cm and height 33 cm) for tables with length of 120 cm. N40 added piece is meant for monitor; it can be installed on any kind of table or angle element.

Office cases and stands are presented in three kinds of dimensions of height and length. Lids and bottoms of cases and stands are made of high-quality laminated chipboard 28 mm thick, and are panelled with a shockproof PVC edging which is 2,0 mm thick. Side surface, shelves, drawers and fronts are made of high-quality laminated chipboard 18 mm thick.

R11S wardrobe is 82 cm wide, 55 cm deep and 200 cm high. It is equipped with solid chipboard doors, handles and a pullout beam for clothes.

R21S wardrobe is 55 cm wide, 42 cm deep and 200 cm high. It is equipped with solid chipboard doors, handles and a pullout beam for clothes.

Open stands are presented in 3 different heights:

• R10, R20 - height 200 cm;
• R40, R50 - height 123 cm;
• R60 - height 80 cm.

and two different widths:

• R10, R40, R60 - width 82 cm;
• R20, R50 - width 43 cm.

The space between shelves is meant for folders.

R11 (width 82 cm, depth 42 cm, height 200 cm) and R21 (width 43 cm, depth 42 cm, height 200 cm) office cases are equipped with shelves and solid doors amde of chipboard and supplied with handles.

"UNO+" collection has 2 types of doors made of chipboard and glass. Chipboard doors are presented in 2 different heights: R82 is 115 cm high, R83 is 76 cm high. Glass doors are also presented in 2 different heights: R84 is 115 cm high, R85 is 76 cm high. Bookcases' doors are installed on auto-hinges which are 3-way adjustable (up and down, to the left and to the right, back and forth); they are supplied with handles.

Finishing stands are presented in two different heights: R30/1 is 200 cm high, 42 cm wide and 42 cm deep, R31/1 is 123 cm high, 42 cm wide and 42 cm deep.

The present collection includes 3 kinds of pedestals with drawers. Mobile pedestals with drawers have the following dimensions: width 42 cm, depth 54 cm and height 45 cm. С10 pedestal has 3 drawers installed on metal glide structures.

С11 pedestal has a pullout drawer (metabox) which is installed on metal glide structures, and low shelf, covered by the door.

Pedestals with drawers are equipped with both handles and locks; they are installed on castors.

С12 stationary pedestal 42 cm wide, 55 cm deep and 75 cm high, is equipped with 3 drawers, which are installed on metal glide structures.